Hopestone carries $3 million in liability insurance

1. Once locates are marked out and all proper paper work is in order, site preparation occurs with fencing, barriers, sheathing for the ground protection.
2. Remove any obstacles such as air conditioners, planters, walkways and decks.
3. Excavate foundation down to the footing and ensure benching is as per ministry regulations in slope ratio. Also to shore all areas excavated.
4. Pressure wash the entire foundation and footing, followed by using a tiger torch to extract water trapped within the concrete from over the years.
5. Make any repairs needed, using a pneumatic chipper and hydraulic cement to fix any leaks or holes.
6. Apply a hi-tac primer made exclusively by Bakor, maker of Blueskin, over the entire foundation surface and footings.
7. Apply a warranty approved yellow jacket mesh-and seal all seams.
8. Apply a Platon foundation membrane.
9. Remove the old weeping tile and install a new perforated/clothed 4" O-pipe
10. Cover new weeping tile with a landscape fabric, along with 2 feet of clear washed 3/4" gravel.
11. Backfill excavated areas, grade and finish as agreed on.

WET BASEMENT SOLUTIONS - Call James today 647-859-0773

Basement waterproofing, weeping tiles, masonry restorations, brick and chimney repairs